How to remove the self adhesive vinyl stickers

 Here's how:

1, blow with a hair dryer for a while, after heating the glue will melt, can be relatively easy to uncover. If there are still some traces can not be removed, you can use wind oil essence smeared, will remove relatively clean.

2, with paper towels stained with some alcohol (it is recommended that industrial alcohol, do not need medical also make do) wipe, and then rub a few times clean.

3. Use acetone, same method as above. It's used sparingly and completely, and what's better is that it gets rid of the remaining glue faster and easier than alcohol.

Both of these are solvents and are the most effective of all methods.

4, with nail polish remover. Use the same as alcohol acetone. Nail polish remover doesn't have to be of good quality, either good or fair, as long as it takes the polish off.

5. Use hand cream. First tear off the printed products on the surface, and then squeeze some hand cream on the top, slowly rub the thumb, rub for a while can put the sticky residue rub down. Just a slower one. Hand cream is an oily substance, and its properties are incompatible with those of gum. This property is used to remove glue.

6. Banana water, an industrial agent used to remove paint, is readily available (you can buy it where you buy it) in the same way as alcohol acetone.

7. It is difficult to remove the post film that has been used for a long time. It can be heated and softened with a hair dryer to remove the post film, and then washed away the remaining back glue on the glass with rosin water

Self-adhesive label material is also called self-adhesive label material. It is a composite material made of paper, film or special materials, coated with adhesive on the back and coated with silicon protective paper as the base paper. Due to a variety of coating technologies, self-adhesive materials have different grades. At present, the development direction is to develop from the traditional roller coating and scraper coating to the high pressure flow coating direction, in order to ensure the uniformity of coating to a greater extent, avoid the generation of bubbles and needle eyes, and ensure the coating quality. However, the flow coating technology is not mature in China. Traditional roller coating is mainly used in China.