How to Apply One Way Vision Window Film

About One Way Vision

One way vision all called see-through sticker; mesh sticker; window film. The main material are PVC Film, black adhesive, and white paper liner. product features: The aperture and hole distance of the single-hole membrane completely conform to the golden section method, the hole diameter is 1.6mm, and the hole distance is 2.4mm, which can achieve transparent The best combination of light rate and picture performance rate.

How to apply one way vision?

1. Working environment

Make sure to not apply films in direct sunlight, make sure the temperature of the film, the window/surface itself and the surrounding air is ideally around 12 to 18 degrees Celsius. Extensively clean the window surface, the window frame/floor/ceiling, your hands and the surrounding area, including you work environment. Clean it of durst, dirt, paint, grease, silicone, etc.. Use a window scraper to thoroughly clean the glass. Also, make sure that you remove any cleaning liquids, solvents and other chemicals you used during the cleaning of the glass. Extensively wash the windows with just water after cleaning them.

2. Removing the backing paper
Remove the backing paper very carefully/slowly as to not damage the vinyl. When the film contains cut-outs, be very careful when removing the backing paper, as to not tear the film itself, when parts remain stuck to the backing paper.

3. Applying the film
Use 2 or more people. One holding the top/left of the film and one holding the bottom/right to position the window film correctly. During application one holds the film a couple of centimetres above the surface, while the other person cards with the squeegee, starting in the centre of the film.Use your fingers to press on those elements to additionally activate the self-adhesive, after application.

4. After application of the film
If after application you have a problem area. Gently heat the problem area with a heatgun or infrared heater to activate the “self-healing” properties of the film. Subsequently, use your thumb to gently rub over these areas.