Home support: how to choose the number of wear-resistant floor wear

Wear resistance

The higher the wear resistance, the longer the floor should be used, but the wear resistance is not the only criterion for measuring the age of the floor. Under normal circumstances, the wear resistance of the composite floor reaches 10,000 rpm, and the products with less than 10,000 rpm may have different degrees of wear after 1-3 years of use.

Expansion rate after water absorption

This indicator can be regarded as qualified within 3%. Otherwise, if the floor is exposed to moisture, or if the humidity is relatively high and the surrounding seal is not tight, deformation will occur, which will affect normal use.

Formaldehyde content

This is a key indicator of whether a product of choice is harmful to the body, but it is easily overlooked by consumers. According to European standards, the formaldehyde content per 100 grams of floor should not exceed 9 milligrams, if more than 9 milligrams are unqualified products.

Floor thickness

At present, the thickness of the floor on the market is generally 6-12 mm, and the thickness should be thicker when selecting. The thicker the thickness, the longer the service life, but at the same time the actual needs of the family must be considered.

Floor weight

Floor weight is primarily dependent on the density of the substrate. The substrate determines the stability of the floor and the impact resistance. Therefore, the better the substrate, the higher the density and the heavier the floor.

Environmental performance

The common concern of all is the environmental performance of the floor. The first consideration when choosing a floor is the environmental friendliness of the product, followed by other properties and prices of the product. You can confirm whether the floor is an environmentally friendly product by checking whether there is a relevant green certificate.

After sales service

Strengthening the floor generally requires professional installers to use special tools for installation, so you must ask if the merchant has a professional installation team, and whether you can provide a formal warranty certificate and warranty card.

Aoli is specialized in wear layer of SPC floor, the thickness from 100 microns to 500 microns. Width and thickness could be customized. More info. need get please feel free contact with us!